After adjusting any setting, the device will always return to show the CURRENT room temperature. The “target” temperature is only shown when making changes on that mode. Once the space reaches the desired temperature, it will automatically shut off. If you would like to have the heater run continuously regardless of the temperature in the room, keep pressing the UP arrow until the number changes to show two circular arrows indicating “continuous run”.
If you set a “target” temperature rate for your space, the heater will automatically shut off once the room reaches the desired temperature. If you would like to have the heater run continuously regardless of the temperature in the room, keep pressing the UP arrow until the number changes to show two circular arrows indicating “continuous run”.
To reset, enter the Wi-Fi mode through the menu button, then press and hold the up button for 3 seconds until “SET” appears. Then press and hold the up button for 10 seconds and the humidifier will reset to its factory default settings. This should only be done if your smartHEATER is experiencing any operation difficulties.
Place the heater on the floor at least 3 feet from furniture, pillows, bedding, papers, clothes or curtains. Make sure it’s a heat resistant surface in a well-ventilated area.
Rub-a-dub-dub, there’s no need to scrub. Clean the outside of the heater by wiping it with a damp cloth and buffing with a dry cloth. Be sure not to use any detergents or abrasives, and don’t let any water get in the heater.