White Infrared smartHEATER

Use the menu button which looks like two rectangles to select different modes, and use the up and down arrows to switch settings within each mode.

After adjusting any setting, the device will always return to show the CURRENT room temperature.  The “target” temperature is only shown when making changes on that mode.  Once the space reaches the desired temperature, it will automatically shut off.  If you would like to have the heater run continuously regardless of the temperature in the room, keep pressing the UP arrow until the number changes to show two circular arrows indicating “continuous run”.

If you set a “target” temperature rate for your space, the heater will automatically shut off once the room reaches the desired temperature.  If you would like to have the heater run continuously regardless of the temperature in the room, keep pressing the UP arrow until the number changes to show two circular arrows indicating “continuous run”.

To reset, enter the Wi-Fi mode through the menu button, then press and hold the up button for 3 seconds until “SET” appears.  Then press and hold the up button for 10 seconds and the humidifier will reset to its factory default settings.  This should only be done if your smartHEATER is experiencing any operation difficulties.

Turn the heater on and view the temperature reading on the display screen.  Press and hold the UP arrow for a few seconds to switch from one to another.  You will see the change on the display screen.

Place the heater on the floor at least 3 feet from furniture, pillows, bedding, papers, clothes or curtains. Make sure it’s a heat resistant surface in a well-ventilated area.

Rub-a-dub-dub, there’s no need to scrub. Clean the outside of the heater by wiping it with a damp cloth and buffing with a dry cloth. Be sure not to use any detergents or abrasives, and don’t let any water get in the heater.

Using extension cords can be dangerous because of the high power the heater draws. We strongly advise against it for safety reasons!

Let your heater cool completely, then store it in a dry location. Be sure not to pile heavy stuff on top of your heater during storage—that could damage it.

The heater has electrical components and should be dropped off at an E-Waste recycling center. Find an E-Waste site near you.